HMP 12

Turbine Flow Meters with Pelton Wheel for monitoring heating and cooling circuits

The HM P (P for Pelton wheel) series turbine flowmeter works according to the Pelton wheel turbine principle and is used to measure continuous and discontinuous volume flows. It is used primarily for cost-effective flow rate measurement in heating and cooling circuits. Even heavily contaminated media at very high temperatures can be measured thanks to the special design and bearing concept.

View specification View documents

Functions & Specifications

Measuring Ranges: 8.5 up to 85 l/min
Repeatability: Repeatability
Linearity: ±2.5 % of actual flow (viscosity 1 mm²/s)
Viscosity Range: 0.8 up to 10 mm²/s
Materials: Housing: as per DIN 1.4305 [AISI 303]
Wheels: as per DIN 1.4122
Bearing: Brass, Ceramics
Seals: FKM, graphite
Pressure: up to 20 bar [290 psi]
Medium Temperature: -60 °C to +350 °C [-76 °F up to +662 °F]